Home > How it Works

Step by Step Instructions

Hint: this is going to be a brief description of how to use the Green Mitt System on your fabrics. For a more detailed article check out our blog on how to clean the upholstery in your home.

First let's talk about what you need.

1. A strong vacuum cleaner with a hose
2. Two buckets
3. Green Mitt
4. Two ounces Clean Safe Products carpet and upholstery cleaner mixed with one gallon warm to hot water
5. One bucket filled with warm water for rinsing

Now let's get into what you need to do.

Step 1

Remove the dry soils by thoroughly vacuuming the fabric.

Step 2

Mix 2 ounces of the Clean Safe carpet and upholstery cleaner with 1 gallon of warm to hot water in one bucket. Fill a second bucket with only warm to hot water. This will be used for rinsing so it is important to make sure this water is always clean.

Step 3

Submerge the Green Mitt into the bucket with the cleaner in it and wring it out.

Step 4

Select one section of your upholstery to clean at a time. Concentrate on this section and don't move to the next until this is finished. Wipe the section down with back and forth motions, rubbing the mitt into the fabric. Flip the mitt and use the other side.

Step 5

Now that you've cleaned one section, submerge the Green Mitt in the bucket of rinse water and wring it out. Repeat steps 3-5 on a different section of fabric.

After you have gone over all the fabric with the Green Mitt, let dry and check out your results! Drying time should range from 15-60 minutes depending on how soiled the fabric was. For heavier soiled fabric pre-spray the area with the carpet and upholstery cleaner using the spray bottle included in the Green Mitt System. Let the solution dwell on the fabric for a few minutes. This will make it easier for the Green Mitt to remove the soils that are deep in the fabric. Seasonal wipe downs are recommended to keep your fabrics always looking brand new.